You may be surprised to find just the way to spray on auto paint really can not be difficult. That doesn’t mean that you go at it and can simply grab a tin of paint. There are some fundamentals you have to understand. Both in the preparation and application.
Step A:
Prepare by assembling all your things that you’re going to need. Make certain your surrounding area is protected against any possible through aerosol. Any parts that don’t need to be sprayed and that can be removed then do so.
Step B:
You may have to examine the car carefully. These will need to be sanded with 300 grit sand paper. It also enables the spray car paint to adhere better. Once you have finished sanding, make certain all the dust dirt and debris are taken from the vehicle. It is imperative that the car be totally clean.
Step C:
This will make sure you get an overall even coating of your coloured paint plus helps the paint to adhere well. Be sure to allow for drying in between and apply light coats when you spray the primer. The best way to spray on car paint takes a little getting used to.
Step D:
Now you’re pretty well to the point where you are around ready to spray the shade. You may have determined to use the spray car paint that comes in aerosol cans, or perhaps you might have selected for the spray gun. Before you begin with the automobile either way, make a couple of practice strokes on an item. Start the passes with the paint without reluctance, once you’re ready. If you hold the spray can or gun in one area, you will get uneven coverage and perhaps the paint will run. If this happens you’ve got a significant repair job on your had. You will most likely have directions regarding the best way to spray on auto paint using the equipment or spray cans.
Step E:
It is up to you whether you want to wet sand between coats of primer and colour paints. You may want to study this alternative on the web, or check with someone that is familiar with just how to spray on car paint
Step F:
Once you’re totally satisfied with the shade, you’re down to the finishing touches. You’ll now need to apply several clear coatings. This will give the shine and finished look to the auto in addition to protect the finish. It will be up to you although probably two coatings will be satisfactory. Make absolutely certain it truly is dry in between coats.
Step G:
Yet again, you’ve the option Alloy Wheel Repair Harold Hill of wet sanding if you favor. Again, it is suggested you request the guidance of individuals which are comfortable with the way to paint an automobile. If you decide to follow this measure then you need to wet sand with the following grits in this sequence. This will remove spots that could be too heavy in the clear coating application.
Step H:
Step I:
You should buff the surface. To do this just use a medium cut polish. Once this has been done by you, you should have a glassy look that is perfect to the finish.
Step J:
As a final touch, you may want to apply a couple of coats of wax.